Tent auditorium ZH 8
|Application area||Accommodation and Catering, Industry and commerce, Promotion agencies, Associations & Youth groups – tent camps|
|Base area||48,00 m²|
|Eaves height||2,30 m|
|Ridge height||3,74 m|
All tent auditoriums can be extended by 3.00 m and have a side height of 2.30 m. From a length of 27 m, additional wind bracings are required.
Construction and authority check book
All tent auditoriums with a base area of over 75 m2 are delivered with a building record book for a fee. It includes the certified structural calculation, a report from German authorities and pages for authority checks after set-up. For tent auditoriums of less than 75 m², the construction and authority check book will only be supplied upon request.
Truss, tent prop and medium pediment made of extruded 2-channel aluminum hollow profile 84 x 48 mm with a span of 4.00 m, 6.00 m, 8.00 m and 10.00 m and a truss spacing of 3.00 m, aluminum curtain tubes and aluminum spacers. All aluminum parts are anodized and maintenance-free. Steel parts such as base plates, ridge and eaves inserts are hot-dip galvanized according to DIN 50976 and extremely corrosion-resistant.
All screws are galvanized, the wind bracing ropes are covered with plastic. The anchoring is realized by steel anchors.
Roof tarpaulin with keder made of both sides PVC-coated polyester fabric, high-gloss, color white, flame-retardant according to DIN 4102 B1 resp. M2, weight approx. 600 g/m², overhang 30 cm straight, expander bracing.
Gable triangles (divided in the middle by zipper) and side curtains in the same quality as the roof tarpaulins, alternatively side curtains with broad stripe design on the outside in white / yellow or white / blue, stripe width approx. 9 cm, curtain divided in the middle of each field with a zipper, on the Eaves with curtain rings, on the floor closed hemstitch to hold weight pipes.
The roof is always finished in white PVC, the side curtains are available in the standard colors listed below.