AZM 11-6 self-erecting tent with fully inflatable frame
Download PDF 
| Application area | Civil Defence, Military, Police/Gendarmerie |
|---|---|
| Base area | 248.60 m² |
| Width | 11.20 m |
| Length | 22.20 m |
| Eaves height | 4.35 m |
| Ridge height | 6.00 m |
| Weight | 765.00 kg |
The AZM 11-6 is an inflatable, modular tent. In the length of 11.40 m, it consists of 3 sections (modules) which are connected by zippers (tent skin), locking pins (inflatable frame) and hook-and-loop fasteners (Velcro, flooring). Additional central sections (module 2, centre) can be added to increase the length of the tent by steps of 5,40 m up to 16.80 m, 22,20 and so on. The minimum length is 6 m and is built with front and rear modules only.
Each module consists of 3 load-bearing parts: first the tent skin with integrated textile flooring, second the inflatable air beams with attached inflatable spacers and third the foldable aluminium tubes as additional spacers at the longitudinal sides. The textile covering is attached to the inflatable system by means of Velcro. The modules are delivered pre-assembled, only the aluminium tubes must be fitted during erection. The modules are assembled in the field.
Frame
Inflatable tubular frame made of airtight polyester fabric (1100 g/m²) coated on both sides with PVC. Foldable aluminium tubes are used between the eaves arches.
Tent skin
The tent skin is attached to the inflatable frame by locking pins and hook-and-loop fasteners to the floor.
It is made of polyester fabric (0.70 kg/m²) PVC-coated on both sides. The fabric is flame-retardant, waterproof and rot-proof.
Floor
Flooring made of double-sided PVC-coated polyester fabric (0.70 kg/m²), colour grey.
Options and accessories
- Internal partition walls
- Inner liner
- Fabric according to military standards
- Connecting and entrance modules
- Side entrances
- Electric inflator
- Tent lighting
- Tent heating
- Air conditioning
- Lettering