RDT S 70
The frame is made of specially designed anodized aluminum profiles, the connectors consist of die-cast aluminum. Independent of the tent size the roof area of the frame comes already assembled in one piece. Leg poles and extendable base plates are also pre-assembled and only need to be slipped on the corner connectors.
Tent skin and flooring are made of high quality PVC-coated polyester fabric. They are joined by high frequency welding, therefore the seams are watertight. As a standard the tent skin is flame retardant acc. to DIN4102 B1, other standards on request. The tent is equipped with rear and front door with entrance flap, four passages for climatisation as well as cable passages. At the outside all necessary hangers and ropes are provided, hanging points at the inside for inner liner, roof mesh, lighting etc. are standard. A broad ground skirting allows loading with sand bags etc. in case of need.
The tent comes with complete frame, tent skin with integrated flooring, pegs to anchor frame and tent skin, hammer, packing bags for tent skin, frame and accessories. Other options available.
- Erection area: 70 m² / Assembly (number of persons req.) 5
- Frame length: 11,60 m / Frame width: 5,80 m
- Frame, eaves height: 2,20 m / Tent, eaves height: 2,15 m
- Frame, max. height: 3,40 m / Tent, max. height: 3,15 m